https://www.stasanet.rs/images/products/big/1552.png

JA-190Y GSM modul JA-10 serije

Šifra: 622

Proizvod iz grupe: Jablotron 10
Proizvođač: Jablotron

Napomena: Artikal je informativnog karaktera, mogu da kupuju samo sertifikovani instalateri.

GSM komunikacijski modul dizajniran je za kontrolne ploče alarma JA-100K i JA-100KR. Služi kao sigurnosna rezeva i proširenje LAN komunikatora, koji je dio upravljačke ploče.

Module power supply

12V DC (from the control panel)

Average current consumption

approx. 40 mA (depends on GSM signal strength)

Peak current consumption

750 mA

GSM communication band

QUAD-BAND, 850 / 900 / 1800 / 1900MHz

Classification

Security grade 2/Environmental class II (Note: this applies only in combination with a security-grade-2-certified control panel. For more info about ARC settings, see the Control panel installation manual)

- Conforms to

EN 50131-1 +A1 ¬+A2, EN 50131-3, EN 50131-10, EN 50136-1, EN 50136-2, ANSI SIA DC-09, T 031

- Operational environment

indoor general

- Operational temperature

-10 °C to 40 °C

- Average operational humidity

75% RH

- SPT communicator type

SPT type Z (control panel expansion module)

- AS/SPT interface

Pass-through

- Supported ATS class/communication protocol:

ATS class 1)	ATS interface	Transmission protocol
SP2	GSM-SMS	JABLO SMS
SP3 - SP5	GSM-GPRS (IP)	JABLO IP ANSI SIA DC-09
DP4 2)	LAN (IP) GSM-GPRS (IP)	JABLO IP ANSI SIA DC-09
Notes: 1. The ATS classes listed in the ATS interface configuration with a transmission protocol are the maximum of what is possible to declare when creating an alarm communication path. The operational classification has to be determined by the establisher after the ARC’s agreement. The alarm communication path is created according to CLC/TS 50136-7 application guidelines. 2. DP4 is supported only in configuration with the LAN communicator. Warning: LAN communication provided via WIFI or GSM is considered as radio communication therefore it is not possible to use a GSM communicator and a WIFI WAN network when a DPx path is created. Explanatory notes: SPx: One communication path to an ARC (Single path) = 1 transmission medium DPX: Dual communication path to an ARC (Dual path) = 2 different transmission media, for example Radio communication (GSM) and Metallic or Optical cables (PSTN, LAN).